Modified Cars – How To Install Decals To Your Car?

Sometimes, Modified cars look better than they did before. Vinyl decals are more commonly used to add an extra flare and to bring some personality to your car. This is the perfect way to ensure that your car stays pristine and cool no matter where you go. When it comes to car modifications, people in Dubai have this one question: how to modify a car with decals?

If you are one of them, then you have come to the right place. Read below and start pasting your decals and stickers like a pro; you certainly don’t need to be a professional to be able to do that. Here is what you need to do.

Modified Cars Decals Surface Area

Before you start pasting your vinyl decals or stickers, you need to make sure that the surface area of your car is clean. You need to ensure that the area you want to apply your decal on is clean of any dust or water. It has to be dried. Also, you need to ensure that your car is not placed in a windy area. You can use rubbing alcohol to make sure the surface area is nice and clean before you move on to the next step.

Modified Cars Decals Surface Area

Measure and Peel

Once you have cleaned the area, you need to start measuring the surface area. Sometimes, the decals can take more space than they appear to be taking. To ensure that your decal will be placed properly, take a measuring tape and check your decal and car. Once you are satisfied, slowly but firmly peel away the decal. It should smoothly transfer to the tape, but if it doesn’t, simply push the two pieces back together and press them with fingers. The decal should transfer to the tape easily.

Measure and Peel Car Decals

Placing and Smoothing

Do not slap the decal on. This will only make it worse. Do not touch the back of the decal or you would leave a finger print behind. Lightly press one end of the decal and keep on pressing the rest to your car slowly. Once fully placed, you can smooth it out with your fingers or a credit card. Using a credit card would be the better option, since it will bring a crisp precision to the placement.

Placing and Smoothing

Image Source: http://www.fox5atlanta.com

Removing the Tape

This is the hardest part, so you should be careful about how you proceed. This part requires patience, so be prepared. You need to let your decal dry out, preferably for 30 minutes or more. Don’t remove the vinyl too quickly, the best way to deal with this situation would be to leave your car out in the sun and let it dry there. Never use a heat gun or hair dryer because they can melt the plastic. After 30 minutes or so, simply peel off the transfer tape and your decal placed perfectly.

Removing the Tape

Image Source: http://www.sdsticker.com

This is the basic approach to add decals to your car. You can add decals to your modified cars for better style and performance too. Car modification Dubai are not that different from anywhere else in the world. Decals are all about making your car look as good as you want it to. So don’t be shy and express yourself the way you want.